How To Make A Winch From A Starter Motor

Last Updated on January 17, 2023 by Automobile Note

We are supported by our audience. When you buy through links on our site, we may earn an affiliate commission. Learn more

Excited about your first-year trip? It would be a shame for the trip to be ruined by a muddy trap, wouldn't it? But did you know that you can easily save yourself from that swampy muddle scenario? Yes, it is indeed possible! All you will need is a winch!

That said, if you do not want to get one from the supermarket, you do not have to! You can make it by yourself. You just need to know how to make a winch from a starter motor. That is the easiest way of making a winch. And in this guide, we will make things much more manageable.

Making a winch from a starter motor is a no-fuss process. You just need the right things and follow the proper steps. Wondering what steps and things we are referring to here? Allow us to walk you through the process!

Step 1: Get the Right Things

You will need to work with a couple of things for this DIY process. Here is the list:

  • Gearbox and gear
  • Drum, usually the ones made from a pipe
  • 12V starter
  • Welding machine
  • Wiring and cable
  • Metal sheet
  • Measuring instruments

Step 2: Build a Platform

After getting all of the things from the list, you will need to prepare a platform. You will rely on this platform to complete all of the steps we will go through below. A flat ground will work like a charm too.

Step 3: Connect the Parts

Lay all of the structural components on a sheet. Then, you will need to establish a connection point between the gearbox and the drum. And to do so, you should make the gear's primary shaft face upward. After that, you should connect the started with the gearbox.

Step 4: Connect the Gear Wheel

Once you connect the parts, put the gear wheel on the gearbox. You can also use a flywheel crown if you can not get access to a gear wheel. That will house all of the wirings. Ensure that everything is in place, and you should be done with the homemade winch. Test it out before taking it with you on trips.

Frequently Asked Questions

What should be the minimum capacity of a winch to pull my car?

To figure out the minimum capacity of the winch, you should consider the weight of your vehicle. Multiply that weight to 1.5x, and you will have the minimum capacity required to pull your vehicle.

Are winches expensive?

There are loads of winches in the budget segment. However, the cheap winches will not offer good overall performance in most cases. For that reason, if you are on a budget, you should try to make the winch by yourself.

Can I tow any vehicle with a winch?

If the winch has enough pulling capacity, you should be capable of towing the car with the winch.

Final Words

When it comes to learning how to make a winch from a starter motor, you just need to consider whether you have the right things or not. You just need to go through three simple steps with that out of the way. So, instead of spending money on cheap and low-quality winches, follow the steps and make one by yourself!

Helpful Guides:

Leave a Comment

11 − ten =